Dual LCD + LED Display
Real-time monitoring of output voltage, grid voltage, battery level and all fault conditions — visible at a glance from the front panel.
Electrent Elect+ Pure Sine Wave UPS Dealer & Distributor in Mumbai
Authorised dealer for the Electrent Elect+ Series — high-end non-solar pure sine wave UPS from 2875VA to 10 KVA (24V–120V). DSP technology, dual LCD+LED display, battery-friendly fast charging, MOSFET and IGBT based switching. Up to 36-month warranty. Ideal for offices, IT infrastructure and industrial power backup.
Electrent Elect+ Series
Electrent Elect+ UPS — High-End Non-Solar Series 2875VA–10 KVA
The Electrent Elect+ Series is the high-performance evolution of the popular Elect home UPS range. Designed for larger offices, IT infrastructure, commercial buildings and industrial applications, the Elect+ delivers 2500VA to 10000VA of pure sine wave backup power with advanced DSP technology, dual LCD+LED real-time monitoring and battery-friendly fast charging.
Available in 24V (2875 and 3500 models), 48V (5500 model), 96V (10KVA) and 120V (10KVA) configurations, the Elect+ supports both TUB and Lithium (LiFePO4) batteries. Lower models use MOSFET-based switching while the 10KVA models use IGBT-based switching — providing the reliability required for mission-critical loads. All models are BIS certified, CE marked and carry up to 36 months warranty.
Standout Features
Advanced DSP Technology
Digital Signal Processor based control ensures ultra-stable pure sine wave output, fast load response and multiple levels of active protection.
Li Battery Compatible
Fully compatible with both TUB (tubular) and LiFePO4 lithium batteries — pairs natively with the Electrent LiFePO4 Battery Bank for a complete lithium system.
Near Zero Switchover
Minimal switchover delay — best for IT equipment including servers, network switches and data storage systems that cannot tolerate any interruption.
MOSFET & IGBT Switching
MOSFET based switching for 2875–5500 models; IGBT based for 10KVA models — delivering higher efficiency and reliability at larger power ratings.
Battery Friendly Fast Charging
Optimised charging algorithm extends battery life by 18–24 months with fast charging capability for quicker recovery after power outages.
Technical Specifications
| Model | VA Rating | Battery Voltage | No. of Batteries | Output Load (W) | Switching Device |
|---|---|---|---|---|---|
| Elect+ 2875 | 2500 VA | 24V | 2 | 2000 W | MOSFET |
| Elect+ 3500 | 3000 VA | 24V | 2 | 2400 W | MOSFET |
| Elect+ 5500 | 5000 VA | 48V | 4 | 4000 W | MOSFET |
| Elect+ 10KVA (96V) | 10000 VA | 96V | 8 | 8000 W | IGBT |
| Elect+ 10KVA (120V) | 10000 VA | 120V | 10 | 8000 W | IGBT |
| Parameter | Specification |
|---|---|
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220 VAC ±10% |
| Output Frequency | 50 Hz ±0.15 Hz |
| Grid Input — Wide Inverter Mode | 100V–280V AC |
| Grid Input — Narrow UPS Mode | 170V–260V AC |
| Peak Efficiency (Inverter Mode) | ≥85% |
| Display | Dual LCD + LED |
| Operating Temperature | Up to 55°C |
| Humidity | 95% non-condensing |
| Cooling | Exhaust Fan |
| Protections | Output voltage, grid voltage, overload, over temperature, short circuit, battery voltage, battery low |
| Certification | BIS IS 16242 / IEC 62040-1 | CE Mark | ISO | RoHS |
| Warranty | Up to 36 Months |
Why Choose Electrent Elect+ UPS?
- High-end DSP pure sine wave output — zero harmonic distortion, safe for all load types
- Dual LCD+LED display — real-time monitoring of all critical parameters
- Lithium battery compatible — upgrade to Electrent LiFePO4 for longer runtime and life
- IGBT based switching on 10KVA models — premium reliability for mission-critical loads
- Battery friendly fast charging — extends battery life by 18–24 months
- Wide and narrow input modes — flexible for all Indian power supply conditions
- BIS certified IS 16242 / IEC 62040-1 — verified for Indian regulatory compliance
- 100% genuine components, in-house PCB and isolation transformer manufacturing
Electrent Elect+ UPS FAQs
The Electrent Elect Series (700–2350VA) is designed for home and small office applications with 12V or 24V single battery banks. The Elect+ Series (2875VA–10KVA) is the high-end upgrade — supporting larger multi-battery configurations (24V to 120V with 2–10 batteries), offering a dual LCD+LED display for real-time monitoring, IGBT-based switching on 10KVA models, and designed for offices, IT infrastructure and commercial loads.
Yes. The Electrent Elect+ UPS is fully compatible with LiFePO4 (LIB) lithium batteries, with separate battery charging voltage settings for both TUB and LIB types. It pairs natively with the Electrent LiFePO4 Battery Bank in the corresponding voltage configuration (25.6V for 2-battery, 51.2V for 4-battery, 96V and 121.6V for the 10KVA models).
The 1-UPS / 2-Bypass rotary switch on the back panel allows manual bypass of the UPS to restore direct mains power to the load if the UPS develops a fault. This ensures continuity of power supply to critical loads even during UPS servicing — particularly important in office and commercial environments.
The Electrent Elect+ battery requirements: 2875 and 3500 models require 2 batteries (24V), the 5500 model requires 4 batteries (48V), and the 10KVA/96V model requires 8 batteries while the 10KVA/120V model requires 10 batteries. Batteries can be standard TUB/SMF or Electrent LiFePO4 Battery Banks in the matching voltage configuration.